BizLink RM-826-Q25-WD, User Manual, Page: 17 / 48

Port Forwarding
Once your BizLink router is connected to an Internet source and you have secured a Static IP address
from that source you can access any connected device on your router network by setting it up on the
Port Forward feature.
Goto> Network>Firewall>Port Forward (on top menu)
Goto> New port forward and enter a name (ideally the name of the device associated)
Set
-Protocol = TCP
-source zone = Interface where your Internet comes in (see drop down)
-Source MAC – leave blank
-Source IP address – any
-Source port – any
-External IP address – any
-External port – select a number between 8000 – 8200 (eg: 8090)
-Internal zone – lan
-Internal IP address – select the drop-down box and find the address of the device on your
network
Internal port – 80
Enable NAT Loopback – check
Then,
Say your Static IP address is 170.15.236.40. You can access your device by entering 170.15.236.40:8090
on your computer URL.