background image

108

109

G

  Always  secure  the  BiXS  bicycle  or  its  components  when 

putting it/them into the interior of your car. Parts shifting 
around can impair your safety.

A

  Most  clamps  are  a  potential  source  of  damage  to  large-

diameter frame tubes that are not designed to be fixed in 
such clamps! Do not use such systems with carbon fibre 
frames.

A

  Please make sure the lights and the number plate of your 

car are not hidden from view 

(a)

. For some carriers, a sec-

ond exterior rear view mirror is required by the road traffic 
regulations.

A

  Bear in mind that your car has a greater overall height with 

the  bicycle  on  it.  Measure  the  overall  height  and  place  a 
sign stating the height somewhere in the cockpit or on the 
steering wheel so that it can be easily seen.

A

  If your BiXS bicycle has disc brakes, be sure to mount the 

safety  locks 

(b) 

before  transporting  the  bicycle  with  the 

wheels dismounted.

A

  Pull the brake lever and secure it with a strong elastic strap 

(c)

  when  transporting  a  BiXS  bicycle  with  hydraulic  disc 

brakes.

BY PUBLIC TRANSPoRT

In the cities the regulations for taking bicycles by public transport 

(d) 

differ. For example, there are some places where you are only allowed 
to travel with your BiXS bicycle during off-peak hours and with an addi-
tional bicycle ticket. Inform yourself ahead of time about the regulations 
concerning the transport of bicycles before you start the trip!

In  the  regional  trains,  regional  express  trains  and  medium-distance 
trains  in  Germany  you  can  stow  your  BiXS  bicycle  in  multi-purpose 
compartments. They are often at the front or end of a train and are 
marked with a bicycle symbol. In Germany you always need to pre-book 
a bicycle space on the IC/EC trains of Deutsche Bahn. This reservation 
must be made one day prior to your journey at the latest. It is not pos-
sible to take bicycles with you in the ICE high-speed trains in Germany.

I

  Remove, if necessary, any heavy or bulky pannier bags and 

luggage for easier boarding and disembarking of the train.

I

  Bear in mind than in Germany each traveller may only take 

one bicycle on Deutsche Bahn trains.

I

  Before you start your trip inform yourself in time about the 

conditions of carriage and also observe the regulations and 
rules about bicycle transport in the countries through which 
you intend to travel.

SPECIAL PoINTS CoNCERNING TRANSPoRT oF YoUR   

BiXS PEDELEC

By Car

BiXS pedelecs

 

can be transported just like conventional bicycles out-

side 

(e) 

or inside a car. Always make sure the BiXS pedelec is securely 

fastened outside or inside the car and check the fastenings regularly. In 
addition, you should always remove the battery from your BiXS pedelec 
prior to fastening it outside the car. Stow the battery and, if applicable, 
a removable display unit, inside the car and secure it appropriately to 
avoid any damage in transit.

Protect the connections of the rechargeable battery against rain, wet-
ness, moisture and dirt during the journey, for example, with a plastic 
bag. 

S

 

The weight distribution on pedelecs differs markedly from 
the  weight  distribution  on  bicycles  without  drive  assist-
ance. A pedelec is markedly heavier than a bicycle without 
drive  assistance.  For  this  reason  parking,  pushing,  lifting 
and carrying the BiXS pedelec is more difficult. Bear this in 
mind when loading your pedelec into a car and unloading it 
or when mounting it on a bicycle carrier system.

S

 

Before transporting several pedelecs with a roof mounting 
or a rear mounting carrier system, inform yourself about the 
maximum load capacity of the bicycle carrier. Keep in mind 
that the weight of a pedelec is higher than the weight of a 
bicycle without drive. It could be that you can only transport 
one or two pedelecs instead of three bicycles without drive.

S

 

Make sure to remove all movable and loose parts and above 
all the rechargeable battery 

(f)

,

 

the control element 

(g) 

and 

the cycle computer 

(h) 

on the handlebars before transport-

ing the pedelec inside or outside the car. If you transport 
your BiXS pedelec without its battery on a bicycle carrier 
system,  protect  the  connections  against  water,  moisture 
and dirt, for example, with a plastic bag.

a

b

c

d

e

f

g

h

Summary of Contents for Chamois






































































Reviews: