SRP-Q200
1-5 Reconfiguration of Printer
• This product supports virtual memory switch change the use the virtual memory switch utility.
Use virtual memory switch management function for self-diagnosis.
• Adjusting print speed and density by virtual memory switch setting
Level
Density
Speed
MSW 1-8
MSW 1-7
MSW 1-6
Remark
1
Light
250mm/s
OFF
OFF
OFF
Default
2
Middle
230mm/s
OFF
OFF
ON
3
Dark
200mm/s
OFF
ON
OFF
Note
- Using the virtual memory switch setting, you can adjust the print speed
& print density in three steps.
- Refer to the utility and service manual for more information.
Caution
Make sure to turn the printer off and on again after using the virtual
memory switch utility to adjust the settings of the product.
Ver. 1.00
- 14 -
