SRP-Q200
(2) If you select “VMSM Selection”
①
The following lines will be printed when the VMSM opens.
** VMSM Selection **
0 : Exit and reboot printer
1 : Print current settings
2 : Set Print Density
3 : Set Cutting mode
4 : Set External Buzzer after cutting
5 or more : None
②
To execute the above function, operate the FEED button as follows.
- Step 1 (selecting desired item): Press the button as many times as the number
displayed before each menu to select the desired setting menu.
- Step 2 (entering setting item): Press and hold the button for 1 second to apply
the selected item.
②
Execute the "0: Save settings and exit" function to apply the changed settings.
When “Save settings and exit” mode is active, the below message will be
displayed and the printer will reboot.
*** COMPLETED ***
Note
If you select any items not listed above, the list of “VMSM Selection”
will be printed again.Setting the mode will be canceled if no item is
selected in Step 1.
Caution
If the "0: Save settings and exit" function is not executed, the
setting information is not stored in the printer.
Ver. 1.00
- 21 -
