Rev. 1.01
- 19 -
SRP-350IIOBE
4. Specification
Printing method
Thermal line printing
Dot density
180 dpi (7dots/mm)
Printing width
72 mm
Paper width
79.5±0.5 mm
Characters per line (default)
42 (Font A) / 56 (Font B) / 56 (Font C)
Printing speed
47.28lines/sec , 200 mm/sec
Receive Buffer Size
4K Bytes
※
NOTE
: Printing speed may be slower, depending on the data transmission
speed and the combination of control commands.
Supply voltage
SMPS Input voltage
100~240 VAC
Frequency
50/60 Hz
SMPS Output voltage
24 VDC
Environmental
Conditions
Temperature
0 ~ 45
℃
(Operating)
-20 ~ 60
℃
(Storage)
Humidity
10 ~ 80 % RH (Operating)
10 ~ 90 % RH (Storage)
; Except for paper
LIFE *
Mechanism Head
150 Km
Auto Cutter
1,800,000 Cut
MCBF *
Mechanism
70,000,000 lines
* These values are calculated under printing level 2 with recommended paper at normal
temperature.
* These values may vary with environment temperature, printing level, etc.
* The switch is the disconnecting device. Turn off switch from any hazard.
