Rev. 1.01
- 63 -
SMP6210
18. Printer Mechanism Handling Method
18-1 Installation of thermal paper
- Press the platen roller block release lever of the printer mechanism.
- Move up the platen roller block to separate from printer mechanism.
- Install thermal paper at the correct position between the paper guide device of the printer
mechanism, and put the tip of the thermal paper upward by more than two inches
(about 5 cm).
- After installing the paper correctly, press and install the platen roller block.
18-2 Removing thermal paper
- Press the release lever of the platen roller block.
- Move up the platen roller block and remove the thermal paper.
18-3 Procedure to clear thermal paper jam
- Press the release lever of the platen roller block.
- Separate the platen roller block from the printer mechanism and move it up.
- Remove the jammed paper or paper residue.
18-4 Procedure to clear cutter jam
- Method to clear the jam through power recycling
When the cutter jams and normal operation is not possible, turn off the power and turn it
on again to clear the jam.
- Method to clear the cutter jam by push button (Refer to Fig 12-1, 12-6)
Press the push button 3~5 times to clear the cutter jam.
Push button lever operating distance: about 5mm
- Method to clear the cutter jam using knob wheel (Refer to Fig 12-7)
Cutter jam can be cleared by turning the knob wheel.
- Method to clear the cutter jam using hand driver (Refer to Fig 12-8)
Cutter jam can be cleared by turning hand driver
Summary of Contents for SMP6210
