Bivocom TG452 Series, User Manual

Page: 27 / 49

3.4.1 PPTP
You can configure either PPTP client or PPTP server, but not both of them at the same
time, as that may cause uncertain issues.
1) PPTP Client
1. PPTP Client
You can enable or disable PPTP client.
2. Server Address
To enter the IP address or Domain Name of PPTP server.
3. User Name and Password
To enter the user name and password provided by server.
4. Remote Subnet
To enter the remote subnet, for example, if LAN of PPTP server is 192.168.2.1, then you
can enter remote subnet 192.168.2.0.
5. Remote Subnet Mark
To enter the remote subnet mask, normally it is 255.255.255.0.
6. NAT
If click NAT, all packets come from ppp0, and the source IP of the packets will be replaced
as IP of ppp0.
7. Enable MPPE Encryption.
You can enable MPPE encryption here.
8. Default Gateway