Preliminary
Camera Control Registers
CON0 Register
Version F.0
BitFlow, Inc.
KBN-4-5
CFGDATA
R/W, CON0[0], R64
Used for downloading firmware.
CFGSTATUS
R/W, CON0[1], R64
Used for downloading firmware.
CFGEN
R/W, CON0[2], R64
Used for downloading firmware.
CFGDONE
R/W, CON0[3], R64
Used for downloading firmware.
CFGCLOCK
R/W, CON0[4], R64
Used for downloading firmware.
FW_7MHZ
RO, CON0[5], Karbon, Neon, R64
If this bit is set, then the board has the update Firmware which can program the fre-
quency of the UART clock to 7.3 MHz. If this bit is zero, then the board has the origo-
nal firmware and the UART can only be driver by an 8 MHz clock. See also the bit:
SEL_UCLK_7MHz.
POCL_EN
R/W, CON0[7], Neon - [New]
This bit turns the the PoCL Safe Power system. This bit must be set to one in order to
enable power to PoCL cameras. However, the system uses the Safe Power system, so
a number of conditions must be met before power is actually applied to the camera.
Summary of Contents for KBN-CL4-2.51-SP
Page 20: ...P r e l i m i n a r y The Karbon CL Models The Karbon KBN 1 12 BitFlow Inc Version F 0 ...
Page 62: ...P r e l i m i n a r y DEST_ADD The Karbon KBN 3 8 BitFlow Inc Version F 0 ...
Page 190: ...P r e l i m i n a r y Camera Link Controls CCs The Karbon KBN 7 12 BitFlow Inc Version F 0 ...