These features may not be available in all areas and may provide inaccurate or incomplete results if used when the coverage is
poor.
Contact us
Whether you are looking for information about Bitdefender BOX that couldn't be found in this Guide, you need to report a
situation, or simply wish to contact us with feedback, visit our dedicated Support web page
http://www.bitdefender.com/box/support. Here you can find answers to most frequently asked questions, or you can use our
Feedback form which you can fill in whenever you need and our support team will answer your questions and assist you in a
timely manner.
If you need to talk with one of our technicians, you can give us a call at (+1)800 8044602, or drop us an email at
[email protected].
For more information about the Bitdefender products, access our official web page:
http://www.bitdefender.com.
If you have any suggestions regarding the content of this User's Guide, send us your feedback at
[email protected].
Regulatory Compliance Information
FCC conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
In order to comply with the RF exposure limits established in the ANSI C95.1 standards, this product should be installed and
operated with minimum distance
[20cm]
between the BOX product and your body. Use only with supplied internal antenna.
Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations.
Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment. It is essential that only the supplied power supply and power cord be used. Use on
ly
shielded cables to connect I/O devices to this equipment.
This device is restricted to indoor use when operating in the 5.15 to 5.25 GHz frequency band.
Canadian compliance
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio
Interference Regulations of the Canadian Department of Communications.
