background image

6.

 

Before applying Scotchgard protector to a large 
area, test in a small, hidden area for colorfastness. 
Examine area when dry. If color is affected, do not 
use. For use on upholstery, look for manufacturer’s 
cleanability code tag. Use only on fabrics coded 
“W” or “WS”. If coded “S” or “X”, do not use. Not 
recommended for use on velvet, silk vinyl, leather, 
or 100% cotton upholstery.

7.

 

Apply Scotchgard protector in a slow sweeping 
motion with a slight overlap of the treated area. For 
best coverage, follow the guide on the cartridge.

8.

 

One 8 oz. cartridge protects 200 square feet 
(18.6 sq. meters). This is equal to two average 
size rooms, (each at 10 x 10 ft. or 3 x 3 meters). 
Periodically check the product level in the bottle to 
ensure the best coverage.

9.

 

Be careful not to spray the protector onto furniture 
or fabric that has not been tested for colorfastness. 
If this does occur, wipe off the protector.

10.

  When finished remove the bottle from the spraying 

applicator tool. If concentrate is left, replace the cap to the 
cartridge and store at room temperature for later use.

11.

  With the applicator tool still on the end of the hose, 

spray clean hot water into the sink to avoid any 
future clogging.

12.

  Store tool in a convenient location for use the next time.

Your ProHeat machine comes equipped with a 
hose and at least one attachment for cleaning 
stairs, upholstery, and more.

1.

 

Important! If using to clean Upholstery, check 
Upholstery Tags. 

A.

  Check manufacturer’s tag before cleaning. 

“W” or “WS” on the tag means you can use 
your ProHeat. If the tag is coded with an “X” 
or an “S” (with a diagonal stripe through it), 
or says “Dry Clean Only”, do not proceed 
with any deep cleaning machine. Do not 
use on Velvet or Silk. If manufacturer’s tag 
is missing or not coded, check with your 
furniture dealer.

B.

  Check for colorfastness in an inconspicuous place.

C.

  If possible, check upholstery stuffing. Colored 

stuffing may bleed through fabric when wet.

D.

  Plan activities to allow upholstery time to dry.

E.

  Vacuum thoroughly to pick up loose debris and 

pet hair. Use a vacuum with a brush attachment 
and a crevice tool to clean in fabric folds.

2.

 

Follow the instructions on page 9 for filling the 
Water Tank and the Formula Tank.

Post-Treatment Scotchgard Protector* (Optional) (Continued)

C

leaning with Attachments

11

Adsdfdd ghg bvh

cvbbj jkn hnbj jkvh

gcghhjj  jhf

fhl kllgh

Manufacturer’s tag

 WARNING: 

To reduce the risk of 
injury, be extra careful 
when cleaning stairs. 
Make sure machine is 
secure and level.

7

13

w w w . b i s s e l l . c o m   8 0 0 . 2 3 7 . 7 6 9 1

ug310-5868_1699_306.indd   13

ug310-5868_1699_306.indd   13

3/1/06   3:13:53 PM

3/1/06   3:13:53 PM

Summary of Contents for ProHeat ClearView 1699 SERIES





















Reviews: