background image

1.

 

Plan activities to give your carpet time to dry.

2.

 

Move furniture to another area if cleaning an 
entire room (optional).

3.

 

Thoroughly vacuum area with a dry vacuum 
cleaner before deep cleaning.

4.

 

Plan your cleaning route to leave an exit path. It is best 
to begin cleaning in the corner farthest from your exit.  

5.

 Pretreating 

(optional)

Note: Pretreating is recommended to improve 
cleaning effectiveness for heavily soiled carpet in 
high traffic areas such as entryways and hallways. 

A.

  Spray the BISSELL Tough Stain Pre-treat formula 

onto heavy traffic areas, soiled areas, or stains.

B.

  Allow to penetrate for at least 3 minutes.

C.

  Following the instructions below, clean as 

normal, using the BISSELL ProHeat machine 
on the High Traffic Setting.

1.

 

Release the handle and lay the machine handle 
back to access the Tank.

2

.

 

Remove the Tank from the base of the machine by 
lifting the Tank carry Handle.

3.

 

Carry like a bucket to the sink. Rotate the Handle 
forward to unlatch the lid. Lift off and set the lid aside.

4.

 

Fill up the Bladder with clean hot tap water. 

*Do not boil or microwave water as it can 
destroy the Bladder.

5.

 

Replace the top of the Tank by matching the lid 
and tank edges. Handle must be in the forward 
position in order to replace lid. Rotate the handle 
to the carrying position to latch the lid. 

Note: Remember to secure the lid and test to 
make sure it is secure before picking up the Tank.

6.

 

Place tank into machine base, seating firmly in place. 
Rotate tank handle back into latched position. Bring 
machine handle back into upright position. 

1.

 

Lift the formula Tank up and out of the machine base.

2.

 

To fill the Formula Tank, first unscrew the Cap 
and Insert. Always use genuine BISSELL formulas 
to maximize cleaning and for the safety of your 
machine. Fill formula up to the line and replace the 
Cap and Insert. Place Formula Tank back into the 
base of machine, making sure it is seated securely.

Note: If bottle leaks, check for proper positioning 
of red gromment and straw.

B

efore You Clean

C

arpet Cleaning

Fill The Water Tank

Fill The SmartMix/Formula Tank

ATTENTION: 

Some Berber carpets have a 
tendency to fuzz with wear. 
Repeated strokes in the same 
area with an ordinary vacuum 
or deep cleaner may aggravate 
this condition. Please see Stain 
Removal instructions on page 15.

1

2

3

4

5

6

B
R
U
S

H

S

U
C
T

IO
N

1

STAR

T

HERE

 4’

2

3

4

8

7

6

5

9

10

11

12

EXIT

    

3’

1

2

 9

w w w . b i s s e l l . c o m   8 0 0 . 2 3 7 . 7 6 9 1

ug310-5868_1699_306.indd   9

ug310-5868_1699_306.indd   9

3/1/06   3:13:49 PM

3/1/06   3:13:49 PM

Summary of Contents for ProHeat ClearView 1699 SERIES





















Reviews: