www.BISSELL.com
11
Spray Tip
1
Maintenance:
Cleaning Machine After Use
To clean machine before
storing it, fill the Formula
& Water Tank with hot tap
water only, in order to flush
out any residual formula
Turn unit on, press and
hold the trigger for
15 seconds while making
back and forth passes
Release trigger and
suction up all of the water
Separate the Pod from
the base, remove the two
Spray Tips, rinse at a
faucet and replace
Unscrew three screws with
a Phillips screwdriver from
the clear Brush Rolls covers
Before replacing clear
cover, inspect the
Brush Rolls and remove
any debris
Wipe out the end caps with a
clean paper towel
Rinse and replace clear Brush Covers,
carefully aligning top cover tabs along
front slots of bottom cover
Spray Tips
Spray Tips
Screw 1
Screw 2
Screw 3
Two Covers
Pivot into place
Insert Tabs
into slots
WARNING
To reduce the risk of electric shock, turn power switch off and disconnect plug from
electrical outlet before performing maintenance or troubleshooting checks.
3
2
