background image

Special tools

Your BISSELL vacuum is not only a powerful  

carpet and rug vacuum cleaner, it’s also a  

versatile above floor vacuum cleaner when  

you select one of the special tools.

1. 

Raise handle to upright position.

2. 

Grasp hose and remove from hose holder.

3. 

Attach tools by firmly pushing onto  

vacuum hose or extension wand.

Crevice Tool:

 

Use in tight narrow spaces.

Dusting/Upholstery Tool  

(select models):

 

Use to dust upholstery, drapes, blinds, shelves, 

baseboards, and much more.

NOTE: The floor brush will continue to rotate 

while tools are in use.

High reach extension wand 

1. 

Remove extension wand by releasing the 

extension wand release lever and pulling the 

handle out of the body.

2. 

Connect the hose to the extension wand by 

inserting into the open end of the extension 

wand and twisting to lock.

Transporting cleaner

1. 

To move your cleaner from room to room,  

put the handle in the upright position, tilt  

the cleaner back on its rear wheels, and push 

forward.

2. 

The cleaner can also be moved by  

using the carrying handle on the front  

of the vacuum.

 www.BISSELL.com      

6

Operations

»  Hair, string and small objects can block the  

vacuum hose or tools. Check them occasionally  

for obstructions.

»  Before cleaning under low furniture, check area  

first for objects that might harm the unit or block  

the vacuum hose.

Tips

2.

1.

2.

3.

1.

2.

» You can use the special tools 

either on the end of the vacuum 

hose or on the end of the High 

Reach Extension Wand.

Tip

Summary of Contents for POWERFORCE COMPACT 1520 SERIES

















Reviews: