www.BISSELL.com
14
Troubleshooting
WARNING
To reduce the risk of electric shock, turn power switch off
and disconnect polarized plug from electrical outlet before
performing maintenance or troubleshooting checks.
Problem
Possible causes
Remedies
Vacuum
cleaner
won’t run
Power cord not plugged in
Check electrical plug
Blown fuse/tripped breaker
Check/replace fuse or reset breaker
Vacuum
cleaner won’t
pick up dirt
Dirt container is full
Empty dirt container
Filter dirty
Check, remove debris or clean
Hose not secure
Check to be sure hose is snapped
into place at both ends
Dirt container not in place
Make sure dirt container is complete-
ly inserted and snapped into place.
Vacuum path clogged
Visually check air passageway, hose
inlet, and hose for anything that
might be obstructing the vacuum
path. Carefully remove blockage.
Rotating power brush drive belt
broken
Replace drive belt
Drive belt stretched
Check drive belt area and remove
obstructions. Replace drive belt if
necessary
Floor brush bristles worn
Replace floor brush
Floor brush jammed
Remove floor brush and clean debris
from brush and ends. Check drive
belt for any damage.
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.
For any questions or concerns, BISSELL is happy to
be of service. Contact us directly at 1-800-237-7691.
Please do
not return
this product
to the store.
For additional FAQs (Frequently Asked Questions) please visit
Customer Support at Bissell.com.
