www.BISSELL.com
13
Cleaning stretch hose and foot hose
1.
Locate the stretch hose where it connects to
the hose elbow on the back of the vacuum.
2.
Look to see if there is any debris in
the hose and hose elbow. Clean as necessary.
3.
Locate the clear foot hose under the hose
holder.
4.
Remove the two screws located to the
left of the hose.
5.
Check for any debris in the hose.
6.
Use a long narrow object such as a broom-
stick to clean the hose. Remove clogs or debris.
7.
Replace two screws to attach foot hose.
Replace stretch hose by sliding over inlet and
rotating upwards towards the lock position.
NOTE: If the debris cannot be reached through
the hose, then follow the instructions for
cleaning the air passageway in the “Clean and
replace rotating floor brush” section.
2.
Two
Screws
Maintenance & Care
CAUTION
Do not use sharp objects, such as a hanger,
to remove clogs.
4.
