background image

8

D

 Care & Storage

D1 - Empty the dirt cup

Empty the dirt cup as soon as the dirt 

reaches the “FULL” lines on the sides of the 

dirt cup.

1. 

Unplug the vacuum from the electrical 

outlet.

2. 

Press the dirt cup release button on  

the carry handle and lift up to remove the 

dirt cup.

3. 

Choose an emptying method. Method  

#2 is recommended for allergy suffers.
 

 Method #1

 – Hold the dirt cup over a 

rubbish bin and push the emptying  

button to open the bottom. Close the 

bottom after the dirt empties.

 

 

Method #2

 – Place a plastic bag over 

the bottom of the dirt cup. Push the 

emptying button through the plastic  

to open the  

bottom. After the dust settles, close the  

bottom and remove the bag to discard.

4. 

Replace the dirt cup by placing it back 

into the vacuum and pushing down on the 

carry handle until it snaps back into place. 

D2 - Cleaning the dirt cup filter 

Use only BISSELL replacement filters in your.

vacuum

1. 

Unplug the vacuum from the electrical 

outlet.

2. 

The dirt cup filter can be reached by 

removing the dirt cup from the vacuum, 

and unclipping the dirt cup lid then pivoting 

backwards. Pull filter upwards to remove.

3. 

Remove the cyclone screen by gripping 

the two tabs revealed by the filter removal, 

and then pulling straight up.

4. 

The cyclone filter screen and dirt cup filter 

can be can be hand washed in cold water 

with a mild detergent. Rinse well and air  

dry thoroughly before placing back onto the 

filter frame base.

5.

 Attach cyclone filter screen into dirt cup by 

placing back into position.

6. 

Place the premotor filter on top with mesh 

tab facing up.

7. 

Close dirt cup lid and replace dirt container 

back onto product.

D3 - Replacing the  
post-motor filter

The post-motor filter assists in the filtration  

process to return cleaner air to the room. 

Use only BISSELL replacement filters.

1. 

Unplug the vacuum from electrical outlet.

2. 

Remove the filter door (located on the back 

of the vacuum) by pushing down on the tab 

and pulling out and away from the vacuum.

3. 

The post-motor filter can be hand washed 

in cold water with a mild detergent. Rinse 

well and air dry thoroughly before placing 

back into the vacuum.

4. 

Replace the filter door by placing the tabs 

on the bottom of the filter door into the 

notches on the bottom of the post-motor 

filter compartment and pushing the tab 

forward back into the vacuum to lock into 

place.

www.BISSELL.ca   

   

To reduce the risk of electric shock, turn power switch 

off and disconnect plug from electrical socket 

before performing maintenance or care.

Do not operate cleaner with damp or wet filters 

or without all filters in place.

This product is intended for household use only and not for 

commercial or industrial use. Vacuuming of dust from products 

like plaster, concrete or ashes will damage the motor and void 

the warranty.

Summary of Contents for opticlean cyclonic 1535




























Reviews: