background image

12

www.BISSELL.com

Drive Belt Removal & Replacement

Occasional replacement of one or both belts 

may become necessary. If that is needed, please 

follow the instructions below.

1. 

Turn OFF the machine, and unplug it from  

the outlet.

2. 

Remove the 2-in-1 Water Tank. Set aside.

3. 

Remove the nozzle and endcaps following the 

instructions below.

4. 

Turn the machine on its side.  

IMPORTANT: cord side up.
5. 

Remove 1 silver screw from the pivot arm.

6. 

Remove pivot arm by gently lifting up.

7. 

Remove the drive belt and replace it by first 

attaching it to the small drive wheel, then attach 

it to the end of the inside brush.

Fluid Connection Point Filter Maintenance

Periodic cleaning of the fluid connection  

point in the spray nozzle may be required. 

1. 

To clean the fluid connection point,  

remove the nozzle and turn it over. 

2. 

Clean the filter on the end of the fluid  

connection point with a small paperclip  

and re-attach the nozzle to the machine.

3.

1.

2.

4.

5.

7.

Maintenance & Care

2.

5.

7.

Brush Removal and Brush Belt Replacement 

Brushes can be removed for cleaning or 

replacement as needed.

1. 

Follow drive belt removal instructions above.

2. 

Remove Brush Rolls by pulling them off of 

the metal rods. Be careful not to lose the small 

washer at each end of the Brush Rolls.

3. 

Replace the brush belt if necessary.

4. 

Place cleaned or new Brush Rolls back onto 

the rods. Make sure one washer is on each end 

of the rollers prior to sliding onto the rod. Be 

sure to let the rod slide through the bushing to 

insure proper fit.

5. 

Reattach the brush belt on the bottom to the 

cogs of the small roller brushes.

6. 

Replace the drive belt by following step 7  

above.

7. 

Place pivot arm in place and screw in place 

using the silver screw.

8. 

Replace nozzle by lining up the locking keys 

with their slots and placing the nozzle back onto 

the foot of the machine. Secure into place by 

turning the locking keys to the lock position.
If you have any questions or are having trouble 

installing or replacing your belt(s) or brushes, 

please call BISSELL® Consumer Care.

Summary of Contents for DEEPCLEAN PREMIER 36Z9 Series

















Reviews: