background image

5

www.BISSELL.com

Operations

Keep plenty of BISSELL® cleaning formulas on hand so 

you can clean whenever it fits your schedule.

NOTE: 

Always use genuine BISSELL cleaning formulas 

upholstery washers in your machine.

Clean + Refresh

Powerful cleaning and odor 

elimination with Febreze 

freshness

PET Stain & Odor

Removes tough pet stains

Includes StainProtect

 to 

protect against future 

stains

PRO MAX 

Clean + Protect

Our most powerful formula 

for tough, ground-in dirt 

& stains

Includes StainProtect to 

protect against future 

stains

PET PRO OXY Urine 

Eliminator

Our best formula for pet 

urine stains & odors

Includes StainProtect to 

protect against future 

stains

Certain trademarks used under license from The Procter & Gamble Company or its affiliates.

OXY Boost

Removes old, 

set-in stains

PRO MAX 

Boost

Add to formula 

for 2X deep 

cleaning power

PET OXY 

Boost

Removes pet 

stains and odors

PET Stain 

Pretreat

Removes tough 

pet stains & 

odors with 

Enzyme Action

PET PRO 

OXY Stain 

Destroyer

Removes tough 

pet stains & 

odors with OXY

PET Pretreat 

+ Sanitize

Penetrates to 

sanitize and 

loosen tough 

stains

Pretreat

Pretreat spots and stains to improve carpet 

cleaning performance.

Boost

Add Boost carpet cleaning formula enhancers to 

any formula to increase its effectiveness.

Cleaning Formulas

WARNING

To reduce the risk of fi re and electric shock due to internal component damage, use only BISSELL cleaning formula intended for use with 

this machine.

To reduce the risk of fi re and electric shock, when cleaning a hard fl oor, the BISSELL bare fl oor tool must be used and it must only be used with 

BISSELL 2X Hard Floor Solutions cleaning fl uid intended for use with this appliance. Visit BISSELL.com to purchase.

Summary of Contents for DEEPCLEAN PREMIER 36Z9 Series

















Reviews: