background image

8

www.BISSELL.com

Cleaning with Attachments

Your deep cleaner comes equipped with  

a hose and at least one attachment for  

cleaning stairs, upholstery and more.

1. Important!

 If using to clean upholstery,  

check upholstery tags. 

1. 

Check manufacturer’s tag before cleaning. 

“W” or “WS” on the tag means you can use your 

deep cleaner. If the tag is coded with an “X” or 

an “S” (with a diagonal stripe through it), or says 

“Dry Clean Only”, do not proceed with any deep 

cleaning machine. Do not use on velvet or silk. 

If manufacturer’s tag is missing or not coded, 

check with your furniture dealer.

 

 a. 

Check for colorfastness in an  

inconspicuous place.

 

 b. 

If possible, check upholstery stuffing. 

Colored stuffing may bleed through  

fabric when wet.

 

 c. 

Plan activities to allow upholstery  

time to dry.

 

 d. 

Pick up any loose dirt, debris and  

pet hair before deep cleaning.

2. 

Follow the instructions on page 6 for  

filling the 2-in-1 Water Tank.

3. 

The DeepClean Premier® is designed with  

an automatic diverter. Simply lock the machine 

upright in order to clean with the hose.

4. 

Attach the cleaning tool to the end of the hose. 

5. 

Plug in and turn on the Power Switch.

6. 

Clean by pressing the trigger to spray  

solution onto the area to be cleaned. Slowly 

move the tool back and forth  

over the soiled surface. Release the  

trigger to suction soiled water. Continue to clean 

in the area, working in small sections, until no 

more dirt can be removed. Rinse (optional) and 

suction as needed. 

Caution: Do not overwet.

7. 

Remove and rinse tools in clean, running  

water. Dry and replace on the end of the hose.

8. 

It is recommended that you suction clean 

water from a bowl to rinse out the hose. 

9. 

Before replacing lift end of hose and stretch 

out to ensure all water is cleared from hose.

10. 

Wrap Flex Hose around the hose wrap.

11. 

Empty 2-in-1 Water Tank and rinse out,  

following the instructions on page 9.

4.

9.

WARNING

To reduce the risk of injury, be extra careful when cleaning 

stairs. Make sure machine is secure and level.

Operations

Manufacturer’s tag

Adsdfdd ghg bvh

cvbbj jkn hnbj jkvh

gcghhjj  jhf

fhl kllgh

Summary of Contents for DEEPCLEAN PREMIER 36Z9 Series

















Reviews: