7.
Remove the top of the tank
by grabbing the sides
of the filter and pulling up.
Pull strainer tab up and out
of the tank to separate hair
and debris from dirty water.
Throw debris into the trash.
8.
Pour dirty water into the
sink and rinse the tank.
9.
Remove filter from the top
of the tank by pulling it up.
10.
Wash filter and screen
with warm water and mild
detergent. Rinse the bottom of
the tank cover.
11.
Leave all parts out to dry
before reassembling.
12.
Place the end of the brush
into the right side of the foot.
Press the tab of the brush
down so it locks into place.
13.
Replace the brush roll
window by lining up tabs on
the edges of the foot. Press
the window back so it “clicks”
into place.
14.
Reassemble the dirty
water tank. Angle tank back
into the body of the machine.
15.
Insert the bottom of the
tank first. Pivot the top toward
the machine until it “clicks”
into place.
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting on the dock.
NOTICE
To reduce the risk of a leaking condition, do not store machine where freezing may occur. Damage to internal
components may result.
After-Cleaning Care
(continued)
EN
10
BISSELL.com
