background image

Ready Tools™ 

Your deep cleaner comes equipped with a hose 

and at least one attachment for cleaning stairs, 

upholstery, and more.

Important! If using the machine to clean  

upholstery, check upholstery tags.

1. 

Check manufacturer’s tag before cleaning. 

“W” or “WS” on the tag means you can use your 

deep cleaner. If the tag is coded with “X” or “S” 

(with a diagonal strike through), or says “Dry 

Clean Only,” do not proceed. Do not use on  

velvet or silk. If manufacturer’s tag is missing or 

not coded, check with your furniture dealer. 

2. 

Check for colourfastness in an  

inconspicuous place.

3. 

If possible, check upholstery stuffing. Coloured 

stuffing may bleed through fabric when wet.

4. 

Plan activities to give upholstery time to dry.

5. 

Vacuum thoroughly to pick up loose debris 

and pet hair. Use a vacuum with a brush  

attachment and a crevice tool to clean in fabric 

folds and tufts.

6. 

To begin cleaning with attachments, follow 

the instructions on page 8 for filling the  

2-in-1 water tank.

7. 

Set the ReadyTools dial to the TOOLS setting. 

This will allow spray and suction from the hose. 

8. 

Attach the cleaning tool to the end of the hose.

9. 

Clean by pressing the spray trigger to spray  

solution onto the area to be cleaned. Slowly 

move the tool back and forth over the soiled  

surface. Release the spray trigger to suction  

dirty water. Continue to clean in the area,  

working in small sections, until dirt is removed.  

Caution: Do Not Overwet.
10. 

When finished cleaning, remove and rinse 

tool(s) in clean, running water.  

11. 

It is recommended that you suction clean 

water from a bowl to rinse out the hose. 

12. 

Before wrapping hose onto tool rack, lift  

end of hose and stretch out to ensure all water  

is cleared from hose.

13. 

Wrap flex hose around tool rack. 

Operations

www.BISSELL.com   

   

10

»  To clean with sliding crevice 

tool, slide brushes forward to 

clean stain, slide back to suction

Tip

7.

12.

11.

Adsdfdd ghg bvh

cvbbj jkn hnbj jkvh

gcghhjj  jhf

fhl kllgh

Manufacturer’s tag

IMPORTANT

Check for colourfastness in an inconspicuous place. If 

possible, check upholstery stuffing. Coloured stuffing 

may bleed through fabric when it becomes wet.

Summary of Contents for CLEANVIEW 44L6 SERIES

















Reviews: