Operations
Fill the 2-in-1 water tank
1.
Remove the tank from the base of the
machine by lifting the tank carry handle.
2.
Carry like a bucket to the sink. Rotate the
handle forward to unlatch the lid. Remove lid,
turn over and locate built in measuring cup.
3.
Fill with BISSELL 2X formula to the indicated
fill line on the built in measuring cup and pour
into mouth of the bladder.
4.
Fill the bladder with clean hand hot
(60°C/140°F MAX) tap water.
*Do not boil or
microwave water as it can destroy the bladder.
5.
Replace the top of the tank by matching
the lid and tank edges. Handle must be in
the forward position in order to replace lid.
Rotate the handle to the carrying position
to latch the lid.
NOTE: Remember to secure the lid and test
to make sure it is secure before picking up
the tank.
6.
Place tank into machine base, seating
firmly in place. Rotate tank handle back into
latched position.
www.BISSELL.com
8
WARNING
To reduce the risk of electric shock, push power button
off and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
6.
5.
1.
2.
4
3.
» Thorough vacuuming
before deep cleaning will
prevent early clogging of
the lint trap.
Tip
