8
BISSELL.com
1.
Turn OFF the machine and
unplug it from the outlet.
Remove the Dirty and Clean
Water Tanks from the base of
the machine.
2.
While standing behind the
machine, lay it on its side.
Looking at the bottom of
machine, find the back center
of the brush carriage where
the carriage latch is located. It
is between the brush assembly
and the front wheels.
3.
Pull brush carriage towards
you with one hand until it
stops, then pinch the carriage
latch with other hand while
pulling the carriage towards
you. The carriage should swing
out to access belt cover.
4.
Remove three screws from
cover.
5.
Lift and remove to access
brush carriage.
6.
Turn the belt inward
towards the large pulley while
lifting out.
7.
Place new belt over small
pulley first and then slip the
belt over the large pulley.
Note:
Test the Brush Roll to
make sure it spins freely before
moving to the next step.
8.
Replace the brush carriage
and screws.
9.
Push brush carriage back
into place making sure the
carriage latch locks back into
place.
Maintaining the Brush Roll and Belt
WARNING
To reduce the risk of electric shock, turn Power Switch OFF and disconnect plug from electrical
outlet before performing maintenance or troubleshooting checks.
Summary of Contents for BigGreen 86T3
Page 11: ......
