BISSELL.com
5
Cleaning Your Carpet
We have additional tips for cleaning your carpet at
support.BISSELL.com
.
Carpet Cleaning Tips
• Before your first use, remove the cardboard cut out from the foot.
• Move furniture to another area if cleaning the entire room. (Optional)
• Vacuum area with a dry vacuum cleaner thoroughly before deep cleaning.
• Plan your cleaning route to leave an exit path. It is best to begin in the corner farthest from your exit.
• Pretreating is recommended to improve cleaning for heavily soiled carpet in high-traffic areas.
• Your machine has a circuit breaker that automatically shuts off the brush if a large or loose object
gets caught in it. If that happens, unplug your machine, remove the object and plug machine in to
reset the circuit breaker.
• You may notice hair and debris deposits on the carpet or in the tank that were loosened while
cleaning (especially with newer carpets that have never been deep cleaned before). This debris
should be picked up and thrown away.
WARNING
To reduce the risk of injury, use extra care when cleaning on stairs. Keep machine on a level surface.
NOTICE
Do not overwet. Take care not to run over loose objects or edges of area rugs. Stalling brush may result in
premature belt failure. Some Berber carpets have a tendency to fuzz with wear. Repeated strokes in the same area with an
ordinary vacuum or deep cleaner may aggravate this condition.
1.
Plug into a proper outlet.
2.
Turn the Power Switch to
the ON ( I ) position.
3.
Recline handle by pushing
down on the green lever on
the back of the machine while
pulling back on handle.
4.
Make cleaning passes. Repeat these passes until solution
being pulled up appears clean.
1. Hold Spray Trigger
• 1 pass forward
• 1 pass back
2. Release Spray Trigger
• 1 pass forward
• 1 pass back
Summary of Contents for BigGreen 86T3
Page 11: ......
