Bissell air 2609 Series, Manual

Page: 7 / 24

7
Maintenance & Care
Filter Replacement
Filter Reset Indicator & Filter Reset
If your digital display is showing
F1
and/or
F2
, this means that either one or both of your fi lters needs to
be replaced.
F1
means that your HEPA + Pre-Filter needs to be replaced.
F2
means that your Carbon Filter needs to
be replaced. If both
F1
and
F2
are fl ashing, both fi lters need to be replaced.
After replacing your fi lter(s), press and hold down the power button for 3 seconds to reset the
fi lter(s). Once reset, the air220 will beep and the
F1
and/or
F2
will no longer show on the digital display.
Each fi lter has easy pull tabs. The tabs should face outward. Insert the activated carbon fi lter before
inserting the HEPA fi lter.
NOTE: Filter life varies based on run time and existing air conditions. It is recommended to replace
both the HEPA and activated carbon fi lter once every six months.
1 2 3 4 5