background image

Your BISSELL PowerForce Turbo Bagless is not 
only a powerful carpet and rug vacuum cleaner, 
it’s also a versatile above floor vacuum cleaner 
when you select one of the special tools.

Raise Handle to Upright Position.

Grasp the Quick Reach Handle and lift Hose Wand to 
separate from suction intake opening.

Attach tools by firmly pushing onto Vacuum Hose or 
Extension Wand.

Combination Dusting Brush/Upholstery Tool:

Two types of cleaning tools are included in one attachment: 
rotate for desired tool.

 

Use Brush side to dust furniture, blinds, books, 

lamps, shelves, and baseboards.

 

Use Upholstery side for curtains, 

draperies, cushions, fabrics.

Crevice Tool:

Use in tight narrow spaces.

Extension Wand:

Use with desired attachment for a 
longer reach.

TurboBrush:

 Use rotating brush action 

for small areas such as stairs and upholstery.

Note: Press gently when using the 
TurboBrush to gain maximum 
cleaning. Too much pressure will 
cause the brush to stop rotating.

When you are done using your vacuum, 
return it to the Upright position and store 
the Power Cord. 

Turn vacuum cleaner off.

Unplug Power Cord by grasping the polarized 
plug (NOT the cord) and disconnect from outlet.

Loop Power Cord around Cord Wraps on side of 
vacuum cleaner.

Clip molded plug to Power Cord to secure.

Special On-Board Tools

7

1.

2.

3.

NOTICE: 

The Floor Brush will continue to rotate 
while you use your vacuum for above 
floor cleaning. To prevent carpet 
damage, do not lean on the vacuum 
or let the Powerfoot tilt forward.

Tip:

Hair, string and small 
objects can block 
the Vacuum Hose 
or Tools. Check 
them occasionally for 
obstructions.

CAUTION: 

The Rotating Floor Brush continues to 
rotate while tools are in use. To reduce the 
risk of injury from moving parts, always 
move the cleaner with the Carrying Handle 
at the back of the cleaner. Always place 
vacuum cleaner on floor with Handle in 
Upright position when using tools. Never 
place your fingers under the cleaner when 
it is running. Never place Powerfoot on 
furniture or uneven surfaces. Do not place 
vacuum cleaner close enough to objects to 
pull them into rotating brush.

Power Cord Storage

1.

2.

3.

4.

NOTICE: 

While vacuuming, certain carpets 
and low humidity conditions may 
generate small static discharges. 
The discharges are entirely 
harmless and are not associated 
in any way with the main 
power supply.

ug203-2829_6596_1105.indd   7

ug203-2829_6596_1105.indd   7

1/11/06   4:03:37 PM

1/11/06   4:03:37 PM

Summary of Contents for 6596

















Reviews: