background image

3

  

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic 
precautions should be observed, including 
the following: 

READ ALL INSTRUCTIONS 
BEFORE USING YOUR 
UPRIGHT VACUUM. 

 

Always connect to a polarized outlet (left slot is 
wider than right). Unplug from outlet when not in 
use and before conducting maintenance. 

  

 WARNING:

 To reduce 

the risk of fire, electric shock, 
or injury:

 

 

 

Do not

 

modify the polarized plug to fit a 

non-polarized outlet or extension cord.

  Do not leave vacuum cleaner unattended 

when it is plugged in.

   Unplug from outlet when not in use and 

before servicing.

  Do not use outdoors or on wet surfaces.

  Do not allow children to operate vacuum 

cleaner or use as a toy.

 

 

Close attention is necessary when used by or 

near children.

   Do not use for any purpose other than described 

in this User’s Guide.

   Use only manufacturer’s recommended 

attachments.

  Do not use with damaged cord or plug.

 

 

If appliance is not working as it should, 

has been dropped, damaged, left outdoors, 
or dropped into water, have it repaired at an 
authorized service center.

 

 

Do not pull or carry by cord, use cord as a 

handle, close a door on cord, or pull cord 
around sharp edges or corners. Do not run 
appliance over cord. Keep cord away from 
heated surfaces.

 

 

Do not unplug by pulling on cord. To unplug, 

grasp the plug, not the cord.

 

 

Do not handle vacuum cleaner or plug with 

wet hands.

 

 

Do not put any object into openings. 

Do not use with any opening blocked; keep 
openings free of dust, lint, hair, and anything 
that may reduce air flow.

  Keep hair, loose clothing, fingers, and all parts 

of body away from openings and moving parts.

  Turn off all controls before plugging or 

unplugging vacuum cleaner.

 

 

Use extra care when cleaning stairs.

 

 

Unplug before attaching the TurboBrush.

 

 

Do not pick up flammable materials (lighter 

fluid, gasoline, kerosene, etc.) or use in the 
presence of explosive liquids or vapors.

  Do not pick up toxic material (chlorine bleach, 

ammonia, drain cleaner, etc.).

  Do not use vacuum cleaner in an enclosed 

space filled with vapors given off by oil base 
paint, paint thinner, some moth proofing 
substances, flammable dust, or other 
explosive or toxic vapors.

 

 

Do not pick up hard or sharp objects such as 

glass, nails, screws, coins, etc.

  Do not pick up anything that is burning 

or smoking, such as cigarettes, matches, or 
hot ashes.

 

 

Do not use without filters in place.

  Use only on dry, indoor surfaces.

  Keep appliance on a level surface.

  Do not carry the vacuum cleaner while it 

is running.

SAVE THESE 
INSTRUCTIONS FOR 
FUTURE USE

THIS APPLIANCE HAS 
A POLARIZED PLUG.

To reduce the risk of electric shock, this appliance has 
a polarized plug (one blade is wider than the other). 
This plug will fit in a polarized outlet only one way. If 
the plug does not fit fully in the outlet, reverse the 
plug. If it still does not fit, contact a qualified electrician 
to install a proper outlet. Do not change the plug in 
any way.

This model is for household use only.

ug203-2829_6596_1105.indd   3

ug203-2829_6596_1105.indd   3

1/11/06   4:03:34 PM

1/11/06   4:03:34 PM

Summary of Contents for 6596

















Reviews: