Quick Start Guide
www.bissell.com
800.237.7691
3
1. Make sure handle of machine is locked in
upright position
2. Attach the cleaning tool to the end of the hose
3. Clean by pressing the trigger to spray solution
onto the area to be cleaned
4. slowly scrub the tool back and forth over
the soiled surface
5. Tilt the tool forward and release spray trigger
to suction liquid
before you begin cleaning
assembly
1.
Move furniture to another area if cleaning an
entire room
2.
Remove large dirt and debris from carpet
3.
Pre-treat spots & stains and heavy traffic
areas (optional)
4.
Fill the clean water tank
4a.
Unlatch the top by lifting up on the latches
on each side of the tank
4b.
Remove the top
4c.
Pour 5 ounces of formula into the heavy
duty bladder (fill the included measuring cup
twice). Fill the rest of the way with hot tap water
(do not boil or microwave water).
4d.
Re-attach top by lining up and securing the
latches on the sides of the tank
5.
Plug into outlet, and turn the power switch on
NOTE: Heatwave Technology™ helps keep hot
water hot while the machine is in use. Simply
turn the machine on to activate Heatwave.
cleaning with attachments
1.
slide upper handle onto machine base
2.
screw 2 screws into the marked holes
3.
Place upper hose rack onto back of
upper handle, and secure with screw
4.
Wrap power cord to the left and flex hose
to the right of the upper hose rack
5.
Attach tool to hose grip
