6
www.BISSELL.com.au
Assembly
Insert foot into body of the
vacuum until you hear a “click”.
Your BISSELL®
MultiReach Essential
vacuum comes in two
easy-to-assemble
components and does
not require any tools
to assemble.
Charging
1
2
Insert Charging Adapter Plug into the
charging port on the back of the unit.
Plug the adapter into the wall outlet.
Charge the unit completely for 8 hours
prior to first use.
click
8
WARNING
Do not plug in your vacuum until you are familiar with all instructions and operating procedures.
LED Light Display Status
Battery Status
Light Status
IN USE
In Use
Solid green light
Low Power
Blinking red light
No Power
Solid red light (blinks every 3 seconds)
Brush Stall
Solid red light, then unit shuts off
CHARGING
Charging
Blinking red light (blinks every 1 second)
Fully Charged
Green light (on 10 minutes, then blinks every 1 minute)
Charger/Battery Error
Red and green blinking light. Remove charger from outlet
and inspect charger for damage.
Battery/Motor Issue
Red and green blinking light. Remove charger from outlet
and inspect charger for damage.
