Bissell 2280F, User Manual

Page: 9 / 12

9
www.BISSELL.com.au
3 4
1 2
Emptying the Dirt Tank
Hold the Hand
Vacuum vertically
and press the
release button on
the front to release
the Dirt Tank.
Make sure the
vacuum is OFF.
Remove the Hand
Vacuum by pressing
the release button
on its top handle.
Grasp filter tabs and pull up to remove
Filter Assembly and empty dirt into
waste container.
Replace filter assembly back into the
Dirt Tank and attach Dirt Tank to Hand
Vacuum until it snaps securely into place.
Cleaning the Filters
3 4
1 2
Tap firmly against the inside of a waste
container, removing any visible dirt.
Replace Filter back into the Filter Screen
then turn clockwise to lock into place.
Attach filter assembly back into the Dirt
Tank and attach to Hand Vacuum until it
snaps securely in place.
Turn power
OFF and
remove the
Dirt Tank as
directed in
“Emptying
the Dirt Tank”
section.
Grasp filter tabs and lift up to remove the
washable filter assembly from the Dirt
Cup. Grip the filter assembly and turn
counter-clockwise, lift down to remove
Filter from Filter Screen.
NOTE: You may rinse the filter and screen in warm water to clean. The filter and screen
need to be 100% dry before reuse. The key to maximum performance is having a clean
filter. Cleaning the filter after each use will help your vacuum operate at peak efficiency.