www.BISSELL.com
11
Cleaning the Intake
After repeated use, dirt and dust can
accumulate around the Intake of the robot
and the working efficiency can be reduced.
To ensure the best efficiency and constant
airflow, the intake should be cleaned
periodically by removing any debris from
the Intake or Brush Roll.
Before cleaning the Intake ensure the robot is
not attached to the Charging Cable or Dock,
and the Power Switch is in the OFF position.
Using the Cleaning Tool located in the
Dust Bin lid, remove any hair or debris
from the Brush Roll.
To remove the Brush Roll, lift the Brush
Roll Cover off the unit and slide the Brush
Roll out.
Insert the clean
Brush Roll by fitting
the round end of
the Brush Roll into
the round end
of the Brush Roll
compartment. Push
the round end inward
and fit the opposing
square end of the
Brush Roll into the
square end of the
compartment until it
is securely in place.
2
3
4
1
5
Re-insert the Brush Roll Cover back onto
the unit.
