Pre-treating
Cleaning effectiveness will be enhanced if you
pre-treat heavily stained or highly-soiled areas.
Here’s how to do it:
1.
Hold the tool just above the surface of the
carpet or upholstery to be cleaned. Press the
spray trigger to release a spray of cleaning
solution directly onto the soiled area.
2.
Wait 3-5 minutes before cleaning.
Cleaning with your portable deep cleaner
1.
Hold the tool approximately 2.5 cm above the
soiled surface. Press the spray trigger to apply
the cleaning solution to the soiled area. Raise
the tool slighty to check for spray.
2.
Using the brush on the tool, gently scrub
the area to be cleaned.
3.
For thorough cleaning, spray additional
solution while the brush and suction are in
contact with the surface.
4.
Apply downward pressure on the tool and
pull it toward you. The suction will remove the
dirt and cleaning solution. Continue until no
more dirt can be removed.
5.
As a final step, use “drying strokes” (by not
pressing the spray trigger) to remove as much
liquid/moisture as possible. Repeat this step
as often as necessary.
Operations
WARNING
Keep spray away from face. Failure to do
so may result in personal injury.
IMPORTANT
Check the manufacturer’s tag before
cleaning upholstery. “W” or “WS” on the
tag means you can use your portable deep
cleaner. If tag is coded with an “S” (with
diagonal strike-through), or says “Dry Clean
Only,” do not proceed. If manufacturer’s tag
is missing or not coded, check with your
furniture dealer.
7
» Deep cleaning stairs and high-traffic areas on
a regular basis helps prolong carpet life.
» Check upholstery stuffing before cleaning.
Colored stuffing may bleed through the fabric
when it becomes wet.
» Before turning off the portable deep cleaner, suction
up clean water to thoroughly rinse out the interior of
the flex hose. Then, lift the tool and point it upwards
to drain any remaining water into the dirty water/
collection tank.
Tips
www.BISSELL.com
