background image

46

40016512

47

11/2017

To ensure your system is safe:

- ensure that an area of at least 50 cm in front of the appliance is 

clear of objects which might hinder air circulation (furniture, 

chairs, etc.);

- position a shelf at least 10 cm above the top of your radiator;

- use mounting screws suitable for your wall;

- do not expose the radiator to intense or prolonged humidity.

This appliance should never be installed with the electrical connec-

tion box positioned topside.

Always turn off the electricity supply (circuit-b pilot wire) 

before making any connections. 

To get the most out of your appliance and enjoy the highest 

standards of comfort, we recommend that you install the appliance 

near places with high heat loss (windows, doors, etc.) wherever 

possible.

You  will  find  a  complete  set  of  assembly  instructions  in  your

 

appliance’s box.

≥100mm

≥100

mm

≥ 

X mm*

≥500

mm

≥100mm

≥100

mm

≥500

mm

≥100mm

≥100mm

≥100mm

≥100mm

≥500

mm

≥100

mm

≥100mm

NOTE:

 Electric towel radiators are designed to be covered safely. 

However, to ensure that your appliance works efficiently, you are 

advised not to cover it completely. Doing so will increase the tem-

perature and cause the internal cutout to turn off the appliance.

* See installation manual for value of X

RECOMMENDATIONS FOR THE OPEN WINDOW DETECTION FUNCTION

(SEE CHAPTER 5.4)

The position of your device affects the way the open window detection function works. It should 

be placed as close as possible to the opening part, but should not be installed near a door.

In addition to the arrangement of your installation in the room, its function is also affected by the 

temperature setting on the device, and the outdoor temperature.

Summary of Contents for 40016512






















Reviews: