background image

Revision B, January 1, 2002 

 

 

VH-900 SERIES FRONT END LOADER 

 

TECNOMEC S.A. de C.V. 

LIMITED WARRANTY

 

 

TECNOMEC S.A. de C.V. warrants to the original purchaser of any new BISON

VH 

equipment, 

purchased from any authorized TECNOMEC S.A. de C.V. dealer, that the equipment be free from 
defects in material and workmanship for a period of one (1) year 

under agricultural use

.  The 

obligation of TECNOMEC S.A. de C.V. to the purchaser under this warranty is limited to the repair 
or replacement of defective parts.  Replacement or repair parts installed in the equipment covered 
by this limited warranty are warranted for ninety (90) days from the date of purchase of such part or 
the expiration of the applicable new equipment warranty period, whichever occurs later.  Warranted 
parts shall be provided at no cost to the user at an authorized TECNOMEC S.A. de C.V. dealer 
during regular working hours.  TECNOMEC S.A. de C.V. reserves the right to inspect any 
equipment or parts which are claimed to have been defective in material or workmanship. 

 

DISCLAIMER OF IMPLIED WARRANTIES & CONSEQUENTIAL DAMAGES 

 

TECNOMEC S.A. de C.V.´s obligation under this limited warranty, to the extent allowed by law, is in 
lieu of all warranties, implied or expressed, 

INCLUDING IMPLIED WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

 and any liability for 

incidental and consequential damages with respect to the sale or use of the items warranted.  Such 
incidental and consequential damages shall include but not be limited to:  transportation charges 
other than normal freight charges; cost of installation other than cost approved by TECNOMEC S.A. 
de C.V.; duties; taxes; charges for normal service or adjustment; loss of crops or any other loss of 
income; rental of substitute equipment, expenses due to loss, damage, detention, or delay in the 
delivery of equipment or parts resulting from acts beyond the control of TECNOMEC S.A. de C.V. 

 

THIS LIMITED WARRANTY SHALL NOT APPLY:

 

1.  To vendor items which carry their own warranties, such as engines, tires, and tubes. 
2.  If the unit has been subjected to misapplication, abuse, misuse, negligence, fire, or other 

accident. 

3.  If parts not made or supplied by TECNOMEC 

S.A. 

 

de C.V. have been used in 

connection with the unit, if, in the sole judgment of TECNOMEC S.A. de C.V. such use 
affects its performance, stability, or reliability. 

4.  If the unit has been altered or repaired outside of an authorized TECNOMEC S.A. de C.V. 

dealership in a manner which, in the sole judgment of TECNOMEC S.A. de C.V., affects its 
performance, stability, or reliability. 

5.  To normal maintenance service and normal replacement items such as gearbox lubricant, 

hydraulic fluid, worn blades, or to normal deterioration of such things as belts and exterior 
finish due to use or exposure. 

6. 

To expendable or wear items such as teeth, chains, sprockets, belts, springs, and any other 
items that in the company’s sole judgment is a wear item.

 

 

NO EMPLOYEE OR REPRESENTATIVE OF TECNOMEC S.A. DE C.V. IS AUTHORIZED TO 
CHANGE THIS LIMITED WARRANTY IN ANY WAY OR GRANT ANY OTHER WARRANTY 
UNLESS SUCH CHANGE IS MADE IN WRITING AND SIGNED BY TECNOMEC S.A. DE C.V. 
Record the model number, serial number, and purchase date. 
This information will be helpful to your dealer if parts or service     
are required.                                                                                  MODEL NUMBER_____________ 
 
MAKE CERTAIN THE WARRANTY REGISTRATION CARD      SERIAL NUMBER_____________ 
HAS BEEN FILLED OUT AND SENT TO TECNOMEC S.A.  
DE C.V./AGS. MÉXICO                                                                DATE OF PURCHASE__________ 

Page 5 

Summary of Contents for VH-900 Series
































Reviews: