18
Periodic Inspection
The following is required to be inspected periodically:
ANSI/ASME B30.16 requires all hoists subject to disassembly of load suspension parts,
to undergo a load test after re-assembly to pass full inspection.
Requirements of frequent inspection:
•
Evidence of loose bolts, nuts, or rivets.
•
Evidence of wear, corrosion, cracks, or distortion to parts such as load blocks,
suspension housing, chain attachments, clevises, coupling, suspension bolts,
shafts, gears, bearings, pins and rollers.
•
Evidence of damage to bottom block assembly.
•
Evidence of excessive wear on motor or load brake.
•
Evidence of damage of supporting structure/ trolley.
•
Direction labels on pendant control stations.
•
Warning labels properly attached to the hoist.
•
Load chain end connections.
•
Evidence of wear, cracks or stretching on the load chain.
Summary of Contents for HHBD01SK-01
