Bism Dive Demo Solis, Operating Manual

Page: 36 / 100

DIVE MODE (DECOMPRESSION DIVE)
At the time of decompression dive (Before decompression stop), it displays the following
information.
○Decompression Stop Depth
・・・・・
Decompression stop depth is displayed every 3m
depending on the diving situation.
○DECO
・・・・・・・・・・・・・・
Decompression stop mark. When you exceed
no-decompression limit, this mark turns on.
○Current Depth (DEPTH)
・・・・・・・
Current depth of water. It displays by 1m unit starting
from 1.5m. *Maximum 99.9m.
○Elapsed Dive Time
・・・・・・・・・
Time elapsed since the start of diving.
*Maximum 599 minutes.
○Tissue Loading Bar Graph
・・・・・
Displays degree of risk of the quantity of nitrogen
(TLBG) accumulated in the body tissue with ten phases.
○Oxygen Accumulation(O2) or
・・・・・
Displays degree of risk of the quantity of oxygen
Partial Pressure of Oxygen (PO2) accumulated in the body or current partial
Bar Graph pressure of oxygen with ten phases.
*Displays either one with higher risk.
○Total Ascent Time (TOTAL)
・
・・・・・
Time required to ascend from present depth to
surface at proper speed with decompression stop.
○Maximum Depth (MAX)
・・・・・・
Maximum depth reached during the dive.
*Maximum 99.9m
○Current Water Temperature
・・・・・
Displays current water temperature.
○Current Time
・・・・・・・・・・・
Displays current time with hour, minutes and seconds.
(TIME 2 screen)
○Direction and Angle Value
・・・・・
Direction reading.
36
Decompression Dive (Before Decompression Stop)
When the screen switches to Decompression Dive (Before Decompression Stop),
decompression stop depth is displayed.
It displays the depth every 3m depending on the diving situation. (Decompression stop depth
display, 3~33m)