Bism Dive Demo Solis, Operating Manual

Page: 62 / 100

●If nothing is operated for 2 to 3 minutes, the display of the direction abbreviation and angle
value switches to “---”, finishes calibration screen automatically in 2 to 3 minutes after, and
returns to Watch Mode, Surface Mode or Dive Mode.
DIRECTION READING ( COMP )
■
Bidirectional Calibration
1.Continue to depress A button for more than 2 seconds in Digital Compass Mode.
・
Release the button if “CALIBRATION” “-1-“ is displayed after “SET” “Hold” flashes
“CALIBRATION” is displayed as flowing.
2. epress L button.
・
It starts to calibrate the first direction.
・
“---“ is shown on the display while calibration is being performed.
・
When calibration is successful, display shows “Turn 180°”, then “CALIBRATION” “-2-“ is
displayed.
・
When “ERR” “-1-“ is displayed, please repeat the same procedure by depressing L button
again.
3. Rotate the product 180 degrees.
4. Depress L button.
・
It starts to calibrate the second direction.
・
“---“ is shown on the display while calibration is being performed.
・
When calibration is successful, display shows “OK”, then it switches to digital compass
measurement.
・
Calibration is completed.
・
When “ERR” “-2-“ is displayed, please repeat the same procedure starting from 2.
62