Bism Dive Demo Solis, Operating Manual

Page: 19 / 100

19
CHARGE BY LIGHT (SOLAR CHARGE)
Power Saving Function
Power saving function is the mechanism which becomes the power saving state automatically
when you put this product in the dark place from 10:00 p.m. to 6:00 a.m.
A power saving state has two phases of level 1 and level 2.
All breakdowns. Condition of the initial setting
(at the time of factory shipment).
DISPLAY
CHARGING STATUS
CONDITION OF THIS PRODUCT
Good condition Normal condition
Just “CHG” flashes
“LOW” or “L” flashes
Shortage of battery
When just a letter of "CHG" flashes, and other indication
lights up as usual, it cannot move to the dive mode.
You cannot use it in diving.
Other functions are available as usual.
When "LOW" and "L", sometimes "L" only, flashes,
you cannot use the following functions.
・
Dive mode
・
Direction reading
・
Light on
・
Sound (such as alarm)
“H”, “M”, “L”
and “CHG” flashes
When "H", "M", "L" and "CHG" flash together, you can use
some functions including the indication of the current time.
Just “CHG” flashes
(All lights out)
All lights out
Out of battery
When just "CHG" flashes, and all other indication
disappear, you cannot use all functions.
ENVIRONMENT (ILLUMINATION)
CHARGING TIME FROM CHARGING
LEVEL WARNING TO THE STATE
BECOMING ABLE TO DIVE
CHARGING TIME FROM CHARGING
LEVEL WARNING TO THE STATE OF
FULL CHARGE
Outdoors on a fine day (50,000 luces)
Window side on a fine day (10,000 luces)
Window side on a cloudy day (5,000 luces)
Indoors under fluorescent light (500 luces)
Approx. 1 hour
Approx. 2 hours Approx. 8 hours
Approx. 30 hours
Approx. 60 hours
Approx. 4 hours
Approx. 36 hours
＊
Actual charging time varies depending on environment.
"WARNING! ! BATT " is displayed 5 times as flowing, and at the same time,
“M” icon at the right side of the screen flashes. Alarm sounds for six seconds.
MODE BEING USED WARNING TO BE DISPLAYED
Watch Mode and Surface Mode Letter of “CHG” flashes
Dive Mode
＊
The warning continues until the charging level becomes "H". Meanwhile,
you cannot use it for diving.
When the state of Level 1 continues for 6 to 7 days.
POWER SAVING LEVEL
TIME REQUIRED TO START POWER SAVING
CONDITION
Level 1
Level 2
Approx. 1 hour after putting it in the dark place.
Sensors stop in Watch Mode.
Only a watch function works.
You can cancel the power saving state by the following methods.
・
Depress either button.
・
Put the product in the bright place.
・
Angle the product to turn on “Auto Light Switch”.
[ Note ]
●When you wear the product, it may become the power saving state when solar panel is
covered by a cuff.
●It does not become the power saving state at the time of Stopwatch Mode, Timer Mode and
Dive Mode.
●You can turn power saving function on and off. (Refer to p. 78)