manualshive.com logo in svg

Bism 4GS Dive Demo Solis, Operating Manual, Page: 95 / 140

Share
Download
Bism 4GS Dive Demo Solis Operating Manual Download Page 95

95

BLE MODE (BLUETOOTH CONNECTION SETTINGS)  

BLE Mode

The log data can be saved via Bluetooth by using the mobile phone application separately. 

(Please refer to the application separately for the connection method.) This section describes 

the operation for SOLIS only.

■BLE Mode Basic Screen

BLE mode basic screen displays the 

following information.

●Current time

●Connection Setting Status (OFF

⇔

ON)

Current Time

Bluetooth Connection

1) Depress M button once in watch mode or surface mode to switch to BLE mode.

●BLE mode is displayed about 1 second after [BLE] is displayed. )

2) Depress P button. The lower display switches from [OFF] to [ON]. 

●The connection is ready.

3) Please connect according to the connection instructions of the application.

[ Note ]

●If mobile phone is not charged enough, you will not be able to connect. Please connect after 

charging.

Summary of Contents for 4GS Dive Demo Solis













































































































































Reviews:

No comments