Bism 4GS Dive Demo Solis, Operating Manual, Page: 79 / 140

79
PLAN MODE ( PLAN )
Set the Gauge Mode
This mode does not perform nitrogen calculation, no-decompression limit calculation, or various
warnings for normal diving. Not used in normal diving.
The depth interval alarm and ascent rate warning will work.
(Ascent rate violation is not logged.)
1) You can switch to the gauge mode from any screen from fraction of oxygen setting to depth
interval alarm setting by depressing A button (about 2 seconds).
2) Depress M button to set [OFF] or [ON].
3) Depress A button.
The gauge mode setting is completed.
Caution
●If you dive after setting the gauge mode to ON, the gauge mode will be locked. For the next
48 hours, the gauge mode setting screen cannot be opened, and it cannot be switched off or
switched to the normal dive mode.
●The gauge mode will automatically turn off 48 hours after ON setting or 48 hours after diving
(3 minutes or more at a depth of 1.5 m or deeper) with ON setting.
●It is not possible to move to the gauge mode setting screen in the case of the tissue loading
status or the lock status.