Bism 4GS Dive Demo Solis, Operating Manual, Page: 5 / 140

IMPORTANT INFORMATION
Warning
●Use other equipment as backup (a depth gauge, diver’s watch, etc.) with this product together when
using this product.
●This product does not measure, display or control your remaining air in a tank. Use a pressure gauge
to check your air supply.
●In the state that residual nitrogen remains after using this product, you must not lend it to or share it
with another person.
●Do not use the data of this product as data of divers other than a user.
●Do not disassemble, repair, modify, replace a rechargeable battery or chamber test under pressure by
yourself. It causes the trouble when you perform these things in a state without appropriate
knowledge and is very dangerous.
●When you remove the battery (rechargeable battery) used in this product, prevent you from
swallowing it by mistake. Please put the battery out of reach of small child. Please see a doctor
immediately when child swallows it by any chance.
●Regardless of frequency in use, please check the product regularly once a year. Particularly, when
you do not use it more than three months from the last season, please use it after checking it.
Caution
●Solvents such as gasoline, sprays and cleaners such as cosmetic, adhesives and paints will adhere
to the product, and substances such as alkali and acid cause it to deteriorate. Please mind these
chemicals as they may damage the product and reduce its waterproofness .
●Do not blow air at high pressure. This could damage the sensor.
●Because a sensor of this product is a precision instrument, never dismantle it. In addition, do not
push the sensor part with a thin stick, and, mind so that garbage and dust do not enter the sensor. In
the case of use in seawater, always wash it away with fresh water as it may lead to the trouble of the
sensor.
●Please do not leave the product in the dashboard of the car or the place near the heater where the
temperature becomes high. In addition, please do not leave it for a long time in the cold place either
as they cause the trouble such as delay, progress and stop of the time.
●Please be careful that liquid crystal screen may be affected when you leave the product in the place
where the temperature is more than +60 C for a long time. The liquid crystal display may become
hard to show indication under the temperature less than 0 C and more than +40
℃ .
5