Bism 4GS Dive Demo Solis, Operating Manual, Page: 51 / 140

WARNING WHILE DIVING
Decompression Stop Violation Warning
When you are in the depth within the range of -0.5<Decompression stop depth<+1.0m, it performs countdown.
When the depth becomes -0.5m less than the decompression stop depth while under decompression stop, it gives
warning.
[ Note ]
●In the case that the decompression stop depth is 3m, it starts warning at the depth less than 2.5m.
DECO MARK
Current Depth
1. When current depth becomes less than the range of
decompression stop depth, a warning letter of
“↓DOWN” flows.
2. DECO mark and STOP mark flash, and alarm sounds for 6
seconds.
3. It cancels the warning automatically when you return to the
depth within the range of the decompression stop depth, but
continues warning when you do not return.
●If warning occurs even once, it will be recorded on dive log.
Warning
●When you ascend (less than 1.5m depth) ignoring the
decompression stop, alarm sounds every 1 minute for
10 minutes after ascent. After 10 minutes, the use of this
product for diving becomes impossible until it passes for 48
hours since then.
●During the basic Watch and Surface Mode, DECO mark,
STOP mark and the current time flash and is in a condition
to be locked.
Please perform the decompression stop at the depth required. Do not perform the
decompression stop at the depth less than the one required.
51