Turn the Lever of Select Valve to "Hoist" mode (FP3500X and FP4000X only)
Push down Carriage Safety Lock Handle and release Safety Hook.
Move Control Lever to "Down" position and lower Drive-On Beams to the lowest
positon. If Safety Hooks can not be disengaged, raise Drive-On Beams
slightly so that Hooks will be free from ratchet.
Check if both of Drive-On Beams are fully lowered.
Check if Wheel Free (Upper Scissors) Lifts are fully lowered.
Make sure to remove all obstacles such as tools, car parts etc. from Driv-On
Beams.
Drive in vehicle on the Drive-On Beams straight and park the vehicle in the center of
the lift.
Park the vehicle so that CG of the vehicle stay within CG Range and in the position
Wheel Free (Upper Scissor) Lift can lift up the best lifting point of the vehicle.
-14 -
If the lifts are not lowered to lowest position, vehicle may hit the Wheel Free (Upper Scissors)
lifts, or Drive-On Beams, or End Beams, and may result in damage to the lift and vehicle.
Caution
Select Valve Lever
Control Lever
Carriage Safety
Lock
Handle
Main Post
Drive the vehicle in slowly to match the center of the vehicle width direction with the center
of the both sides Drive-On Beams. DO NOT drive or stop the vehicle too fast.
Caution
Lifting Point
Upper Scissor
Lift
