background image

BIRO’s products are designed to process food products safely and efficiently. Unless the oper-

ator is properly trained and supervised, however, there is the possibility of a serious injury. It is the
responsibility of the owner to assure that this machine is used properly and safely, strictly following
the instructions contained in this Manual and any requirements of local law.

No one should use or service this machine without proper training and supervision. All opera-

tors should be thoroughly familiar with the procedures contained in this Manual. Even so BIRO
cannot anticipate every circumstance or environment in which its products will be used. You, the
owner and operator, must remain alert to the hazards posed by the function of this equipment.
No one under eighteen (18) years of age should operate this equipment. If you are uncertain
about a particular task, ask your supervisor.

This Manual contains a number of safe practices in the SAFETY TIP section. Additional warn-

ings are placed throughout the Manual. Warnings related to your personal safety are indicated by:

Warnings related to possible damage to the equipment are indicated by:

BIRO also has provided warning labels on the equipment. If any warning label, instruction label

or Manual becomes misplaced, damaged, or illegible, please contact your nearest Distributor or
BIRO directly for a replacement.

Remember, however, this Manual or the warning labels do not replace the need to be alert and

to use your common sense when using this equipment.

1

NOTICE TO OWNERS AND OPERATORS

OR

– NOTE –

A copy of this manual is included with each MODEL VTS-44 VACUUM TUMBLER.

The descriptions and illustrations contained in this manual are not binding. 

The manufacturer reserves the right to introduce any modification without 

updating the manual.

Summary of Contents for VTS-44 VACUUM TUMBLER




















Reviews: