BIRO 55, Operating And Service Manual

Page: 10 / 32

CLEANING
SHARP MOVING BAND TYPE SAW BLADE
TO AVOID SERIOUS PERSONAL INJURY
ALWAYS
Turn Off, Unplug From Power Source and Perform Lockout/Tagout Procedures to This
Machine
BEFORE
Removing Shrouds, Removable Guards, Covers, Doors, Fences or Panels
for Cleaning, Servicing or Any Other Reason.
ALWAYS
Read Operating and Service Manual
BEFORE
Operating, Servicing or Cleaning.
DO NOT
Alter or Modify This Machine in any Way From its Original Form. This Machine in its
Original Form Meets the Intent of O.S.H.A. Applicable Standards.
ONLY
Use Recommended Cleaning Equipment, Materials and Procedures.
NEVER
Spray Water or Other Liquid Substances Directly at Motor, Power Switch or any Other
Electrical Components.
ALWAYS
Thoroughly Clean Equipment Daily.
CLEANING THE BIRO POWER CUTTER:
Disconnect the electrical power from the machine before cleaning. Parts to be removed have been made accessible
and can be removed without tools. Notice the drawing below that all parts are numbered. Each part should be re-
moved for cleaning in the numbered sequence shown. To ensure cleaner cuts, keep the cleaning system in good
condition. Parts on the cleaning system which should be checked weekly, and changed as required. See Maintenance
on pages 9 & 10.
8