BIRO 44, Operating And Service Manual

Page: 6 / 36

SAFETY TIPS
SHARP MOVING BAND TYPE SAW BLADE
TO AVOID SERIOUS PERSONAL INJURY
NEVER
Touch This Machine Without Training and Authorization By Your Supervisor.
ALWAYS
Read Operation and Service Manual
BEFORE
Operating, Cleaning or Servicing.
ALWAYS
Keep Hands Clear of Sharp Band Type Saw Blade and Other Moving Parts.
ONLY
Use a Qualified Electrician to Install According to Local Building Codes: Machine
MUST
Be Properly Grounded.
ONLY
Install on Level, Non-Skid Surface in a Clean Well-Lighted Work Area Away from Children
and Visitors.
DO NOT
Attempt to Operate This Machine Until it has Been Inspected and Demonstrated by the
Seller – Recognized
BIRO
Representative.
DO NOT
Alter or Modify This Machine in any Way From its Original Form. This Machine in its
Original Form Meets the Intent of O.S.H.A. Applicable Standards.
NEVER
Operate with Saw Guard on Saw Guide Bar in the Raised Position or the Saw Guard Re-
moved from the Saw Guide Bar.
ALWAYS
Adjust Saw Guide Bar with Saw Guard to Within
1
2
" of Product to be Cut.
ALWAYS
Use Safety End Cut Pusher Plate for Smaller Products or the Last Cuts of Product.
DO NOT
Use This Machine for Non-Food Products.
DO NOT
Use This Machine to Cut Pigs Feet.
DO NOT
Wear Gloves While Operating.
ALWAYS
Turn Off, Unplug From Power Source and Perform Lockout/Tagout Procedure to This
Machine
BEFORE
Removing Shrouds, Removable Guards, Cover, Doors, Fences or Panels for
Cleaning, Servicing or any Other Reason.
NEVER
Leave Machine Unattended While Operating.
PROMPTLY REPLACE
Any Worn or Illegible Warning Labels.
USE ONLY
BIRO Parts and Accessories Properly Installed.
2