Booting up your BirdDog Studio NDI
As Studio NDI progresses through its boot-up sequence it will
display “STARTUP”.
1
Once the boot cycle is complete it will display “CAM1” by default.
2
Please note. BirdDog Studio NDI should boot up and be ready for
operation in approximately 20 seconds. If it is taking longer than
this it bay be because it is unable to acquire a network “IP” address,
please ensure you have a valid network router on your network with
a functioning DHCP server.
After initial boot up is complete your Studio NDI unit will be visible
as a source on any NDI compatible devices on the SAME ethernet
subnet.
For further networking architecture instructions including routing
please consult either your system administrator or the support
page at
bird-dog.tv
1
2
