birddog PTZ KEYBOARD User Manual Download

Page: 4 / 60

reproduced, translated, or distributed in any form or by any means without prior consent in writing

from our company.

Trademark Acknowledgement

and other BirdDog trademarks and logos are the property of BirdDog Australia. Other

trademarks, company names and product names contained in this manual are the property of their

respective owners.

•

Trademarks and Registered Trademark Acknowledgement

•

Microsoft, Windows, ActiveX, and Internet Explorer are registered trademarks of Microsoft

Corporation in the U.S. and/or other countries.

•

HDMI, the HDMI logo and High-Definition Multimedia Interface are the trademarks or

registered trademarks of HDMI Licensing, LLC in the United States and other countries.

•

Other trademarks, company names and product names contained in this manual are the

property of their respective owners.

IMPORTANT INFORMATION

Legal Notice

To ensure account security, please change the password after your first login. You are recommended

to set a strong password (no less than eight characters).

The contents of this document are subject to change without prior notice. Updates will be added

to the new version of this manual. We will readily improve or update the products or procedures

described in the manual.

Best effort has been made to verify the integrity and correctness of the contents in this document, but

no statement, information, or recommendation in this manual shall constitute formal guarantee of any

kind, expressed or implied. We shall not be held responsible for any technical or typographical errors in

this manual.

The product appearance shown in this manual is for reference only and may be different from the

actual appearance of your device.

Due to uncertainties such as physical environment, discrepancy may exist between the actual values

and reference values provided in this manual. Use of this document and the subsequent results shall

be entirely on the user’s own responsibility.

WARNINGS

Installation and removal of the unit and its accessories must be carried out by qualified personnel. You

must read all of the Safety Instructions supplied with your equipment before installation and operation.

•

If the product does not work properly, please contact your dealer. Never attempt to

disassemble the device yourself. (We will not assume any responsibility for problems caused

by unauthorized repair or maintenance).

Summary of Contents for PTZ KEYBOARD





























































Search results

Summary of Contents for PTZ KEYBOARD

Reviews:

Related manuals for PTZ KEYBOARD

Brands by name

Popular brands

birddog PTZ KEYBOARD, User Manual

Search results

Summary of Contents for PTZ KEYBOARD

Reviews:

Related manuals for PTZ KEYBOARD

Brands by name

Popular brands