Safety Precautions
ii
Safety Symbols
Note:
Calls attention to supplemental information.
Warning Statements
The following safety warnings appear in the text where there is danger to operating and maintenance personnel
and are repeated here for emphasis.
See page 6, 34, and 43.
See page 34, 37, 37, and 43.
See page 39 and 40.
See page 43.
WARNING
Warning notes call attention to a procedure which, if not correctly performed, could
result in personal injury.
CAUTION
Caution notes call attention to a procedure which, if not correctly performed, could
result in damage to the instrument.
The caution symbol appears on the equipment indicating there is important
information in the instruction manual regarding that particular area.
WARNING
Never attempt to connect or disconnect RF equipment from the transmission line
while RF power is being applied. Leaking RF energy is a potential health hazard.
WARNING
To avoid personal injury, disconnect the power cord from the AC line before
performing any maintenance, including fuse replacement or changing the line voltage
setting.
WARNING
Use only Nickel Metal Hydride (NiMH) batteries that have a minimum capacity of 4500
milliampere hours (mAh). Do not install batteries that are not Nickel Metal Hydride.
Do not install NiMH batteries that have less than 4500 mAh capacity. Failure to
comply may result in damage to the batteries, damage to the instrument, and injury
to personnel from battery chemicals.
WARNING
Heavy load. Do not attempt to lift unaided.
