BIOWAIR biow 100, User Manual, Page: 15 / 36

15
R
egeneration &
L
ife
02
CRU BIOW OPERATION
2.7. NIGHT MODE
The CRU Biow has an optical sensor that
measures the amount of light in the room where
the equipment is. When the CRU Biow operates
in night mode, it will operate normally, but the
display will be dimmed.
If the device detects a drop in the light level in
the room, after 20 seconds, the display will shut
down completely except for the symbol and
the symbol indicating the speed at which it is
operating, since this will not change as it does in
“AUTO” mode.
This operating mode provides the user with an
adjustment of the brightness of the equipment
by dimming the brightness of the display, in
addition to the subsequent shutdown of the
display.
NOTE: To light up the display once it is dimmed
or turned off, simply press any of the buttons
on the remote control, and the equipment will
light up showing the parameters of the last
selected program.
2.8. MODO MANUAL
The CRU Biow allows full customization of its
functionality:
• Selection of the air treatment speed: V Silent
, V White , V2 y V3 .
• Activation/deactivation of plasma ionizers
(ION) to electropolarize suspended particles.
• Activation/deactivation of ultraviolet lights
(UV).
• Timer in case you want to temporarily limit
its function.
See summary table in section 2.4 PROGRAMMING
AND FUNCTIONALITIES
.
2.9. WIFI PROGRAMMING MODE
The programming mode, identified with the
WIFI symbol, allows 100% customization of
the CRU Biow functionality in within specific
time slots, as well as controlling or modifying
the programming of one or more CRU Biow,
comfortably and from a single mobile device.
In addition, it allows you to activate the +Protect
function, which activates thermal treatment in
sequential 10-minute tranches, for maximum
protection against viruses and bacteria.
To do so, you need to connect the CRU Biow
via WIFI, installing the Biow APP. (See section
4. BIOW APP – ON DEMAND PROGRAMMING).